Company Description:   
Manufacturer of a Revolutionary, Award winning, Water based, Non-Hazardous, Value-Added Green Product called Picklex 20 One Step Metal Prep., which solves all the Major Issues regularly faced by the Metal Industries in the Metal Surface Preparation area as follows:
1. Rusting Problem
2. Indoor Rust Protection
3. Welding failure
4. Paint failure (including Adhesion failure on Edges and Corners)
5. Painting/Top coating problem in Confined spaces

Below is the breakdown of Picklex 20, eliminating all present processes/chemicals, Performance, Benefits etc. No other chemical or process needed:

Eliminates:
1. Eliminate Grinding, Blasting, Sanding
2. Eliminate removal of Mill scale from Hot rolled steel
3. Eliminate all Hazardous/Toxic chemicals used in the traditional metal surface preparation,
such as Solvent, Acid, Phosphate (both Iron & Zinc), Chromate Conversion coating
(Alodine, Wash Primer with Chromate etc.)
4. Eliminate Hazardous/Toxic Waste Disposal
5. Eliminate EPA/OSHA regulation
6. Eliminate Health hazard

Performance/Benefits/Advantages/Awards:
1. Complete Green Product and Process. EPA tested/verified. Made in USA
2. Winner of National Award (2001) and Edison Award (2013)
3. Safe/simple Ready to Use One Step process
4. Zero Waste disposal
5. If rinsed, the Rinse water is not a Hazardous Waste
6. Works on any Ferrous and Non-ferrous metal including Hot rolled steel with mill scale
without removing the mill scale
7. Performs Multiple jobs in One Step
8. Complete Surface Preparation of new metal by removing mill oil/cutting fluid, remove
surface rust, provide Nano Conversion coating, convert mill scale & pitted rust to a
Weldable/Paintable Conversion coating, Seal the coating and Stop the oxidation process,
all in One Step in around one minute.
9. Provides a Rust/contamination free surface with Zero oxidation (100% cleanliness)
10. Removes surface rust without Etching. So, the surface stays intact
11. Provides Years of Indoor Rust protection (more than 8 to 10 years)
12. Provide much better Welding (AWS, ASME code). Does not cause Hydrogen Embrittlement.
Zero welding failure. Acts as an Anti-spatter
13. Provide excellent Adhesion (including edges & corners) and longer Corrosion resistance
(paint life)
14.Can be used under High Temperature Paint/coating (can withstand around 2000⁰F)
15. In Dipping process, No Sludge, No waste disposal, No regular monitoring, No
concentration adjustment, No Down Time etc.
16.Use in Confined area
17.Unit Cost to the End Users is only few Cents per sq. ft.
18. A lot of Savings of Labor, Time and Cost by eliminating Blasting, Rework etc. Zero product
cost after use
19. Indefinite Shelf Life (No Waste)
20. No Environmental Pollution
21. No Health hazard
22.Does not fall under any EPA or OSHA regulations
23.RoHS and REACH compliant
24. SS Passivation Process, replacing Nitric Acid Pickling/Passivation process with better
quality results. Zero waste disposal
25. One step de-rusting/de-scaling/pickling/coating with Zero Waste disposal and better
corrosion resistance
26. Exceeds Quality requirements/Specification
27. Zero Quality Failure in Welding and Painting since 1998. Zero Re-work.
28. Successfully used by a lot of Major companies since 1998.